Chris Randall: Musician, Writer, User Interface Designer, Inventor, Photographer, Complainer. Not necessarily in that order.
January 30, 2016

Sync 01 and stylus...

by Chris Randall

Audio Damage is sponsoring a manufacturer's event in San Francisco on March 5th, at Codeword (917 Folsom at 5th st). I'll be making a website and promo materials next week, as we finalize who, exactly, is attending.

There will be four live performances, and I think I can safely say that most of the Western US manufacturers will be in attendance. This is shaping up to be a fantastic major West Coast event, and is not to be missed! Codeword has a full bar and attached pizza joint, which covers two of the three major food groups. (it is a satellite of the famous DNA Lounge, and has the same set of facilities). Unfortunately, both the State of California and JWZ are anti-smoking, so the third food group is out of the question.

I'll update this post as information comes in, but I have signed the contract for the venue, so it's a "go" no matter what. For obvious reasons, this will be a Euro-centric affair, but there will be non-Euro synths there from at least one attendee, and I guarantee you'll want to nerd out on 'em. If you're in Central California, be there or be... yeah.

Listen to "stylus" by chris randall.

Also, put up a new track last night. Apparently the genre is "ambstep," something I didn't know existed until it was pointed out to me that this was very much that. (That seems to be the case with micro-genres.)

Anyhow, 100% Euro and found sounds, recorded to, mixed from, and mastered to analog tape. Vocals by Kate Dilemma. Mastered by Wade Alin. I don't have any particular process notes, as this track is very much in line with how I've been working lately: create a bed on the Euro w/ Push2, multi-track it out in to a structured song where the production occurs, stem it to 8-track tape, record the stems back in to the computer, final mix, record to the 2-track, back in to the computer, send it to Wade for the final squish. Download is available on the Octave page. Enjoy!

January 22, 2016

The New Style...

by Chris Randall

Day One of NAMM is in the books, and we've unveiled our four new hardware products. First up is ADM14 BoomTschak (or "BT," as we call it. We're hip to brevity at AD.) This is our first 100% analog product. Not a single line of code. Our motivation was to create a quality high-end analog drum voice, and I think we hit this one out of the park. Accent and choke inputs, a stonking self-resonant multi-mode filter of our own design, three envelopes with curve controls, and a waveshaper give this thing a wide palette. It is a real bruiser, and since it will join Sequencer 1 at the top of our ecosystem, you'll be seeing a lot of it here and in my Instagram feed. We haven't got all the quotes in yet, so we're not 100% on what it's going to cost, but we feel like $450 is attainable, despite the ludicrous parts count. (It has 16 knobs on it, for the love of all that is holy.) We should be shipping these in about 6-8 weeks.

This little fella is DubJr Mk2. It's basically DubJr, at a much higher build quality, and with all the features that people have asked for since the original was released. (Was it 4 years ago? Wow.) Tap tempo, clock input, selectable "free" or "jump" times, and a feedback loop cover all your clocked delay needs, in a 6HP package. Like all of our 6HP effects, this will be $289, and will be shipping in about 3 weeks.

Aaaaand ADP01 Fluid and ADP02 Freqshift. These are stereo guitar pedals. They have true analog bypass, assignable expression pedal destination, and custom laser-cut steel chassis. Having done my time on stage, I know what a bullet-proof pedal needs to be able to take, and these are as tough as they come. ADP01 Fluid is a direct descendant of our super thick 6-delay chorus in our Fluid plugin, with the alterations present in the ADM11 Dimensions Eurorack module. (There already is a Dimensions pedal, so we just named it what it is, Fluid.)

ADP02 Freqshift is a derivation of our original Freqshift module, with alterations for the stereo guitar pedal context. I have never personally really bothered with frequency shifting as an effect in my music, so I was unprepared for what this thing can do. Adam did a hell of a job with the DSP on this one, and it is a super useful and unique effect that can go from the widest, deepest stereo phaser you've ever heard on up to insane screeching and pure industrial craziness. Every guitar player that came to our booth yesterday went "holy shit..." when I kicked that bitch on.

These will be shipping in about 5 weeks, theoretically, but as this is our first foray in to pedal manufacturing, we're approaching it with some caution. I'd rather they took a little more time and we got them absolutely right. So we'll see how that plays out. These will be $290 each.

Anyhow, as for NAMM itself, Eurorack has gone complete honey badger. It seems every company that makes anything is making a Eurorack version of that thing. I haven't really had a chance to wander about aside from our immediate area; hopefully I'll have some more time today to look around. I did have a good long play with the new DSI Obie, and it is a thing of beauty. Very excited to get one of these. Much like the Prophet 6, it is quite easy to get those classic sounds you'd expect to be able to get from an OB-Mx or that ilk, along with all the modern conveniences and some surprises. I'm calling that one a "win." I also had a fiddle with the new MakeNoise desktop synth, the 0coast. I think you should put that in your "must buy" folder. Tony really hit that one out of the park. Simple, inexpensive, and with a tonal range that isn't, to my knowledge, occupied by any other company.

And we soldier on. Day Two starts in an hour.

January 13, 2016

Different Drummer...

by Chris Randall

Whelp, I just have a bit more welding to do, and a couple prototype panels to silkscreen, and we're ready for NAMM. 2015 was a big year for Audio Damage as we got further in to our Pivotâ„¢, and 2016 will be bigger still, as we begin to make mass-market music tech products (initially guitar pedals, but soon to be other things as well) to go along with our continuing Eurorack offerings.

We'll be unveiling four new products at NAMM, at least three of which will begin shipping not too long afterwards. And we'll have at least a couple prototypes and experiments to gauge interest. We're really swinging for the fences this year, and a larger facility here in Phoenix and some local hiring are no doubt in our immediate future as we expand the operation to encompass The New Shit. I've spent most of 2015 learning about large(r) scale manufacturing, while Adam has been studying up on analog design. Even though most of the year was a learning exercise, we still managed to release three new modules (Kompressor, Dimensions, and Neuron.)

We're officially starting 2016 with NAMM, and we will also be attending an as-yet unannounced event in February in LA that promises to be pretty big, and of course the Superbooth 16 in Berlin at the end of March. I will also be giving my scatterbrained clinics in New York and Portland at some point in the first half of the year, as time and finances allow.

In short, it's already been a pretty big year and it's only three weeks old. The cats are nervous, is all I'm saying. If you're attending NAMM, be sure to stop by booth 5000 and say "hi" to Adam and I. Keep in mind that I'll be adding roughly 15,000 new people a day to the several million I've already met over my career, so give me some context and don't expect my middle-aged brain to automatically know who you are. All evidence to the contrary, I'm simply not that on-the-ball.

December 5, 2015


by Chris Randall

I've had the Push 2 for a few whiles now, and (despite a heavy load of Logistics in the last couple weeks) I've been experimenting with how to best integrate it in to my Workflow. (I wonder if that joke has gotten old yet.)

The video above is some of that experimentation. Someone asked via the YouTube comments about what was going on, and in trying to answer, I discovered that it's so hideously complex that it beggars description in a YouTube comment format, so I thought I'd break it down here, where I have a little more control over things. So, what follows is a ridiculous process explanation. Strap in.

Percussion: As you can see, I have two Sequencer 1 units in my Eurorack. The lower one is driving all the rhythmic elements. I have two Neuron modules in the bottom row, and they provide (on the left) the foot and (on the right) the snare. To the right of them is a Noise Engineering Basimilus Iteritas , which is also making a snare-ish sound. They are triggered by the gate, accent, and one of the CV outputs of the Seq1 respectively. Another CV output in Seq1 is driving (via an LFO) a WMD env/vca through which Mad Hatter provides hat duties. The WMD Sequential Switch to the right of the lower Sequencer 1 has the two Neurons and the BI bussed through it, and the fourth output is running to a prototype of DubJr Mk 2 (which you see me occasionally send something to. Should be obvious any time I touch the Sequential Switch.) DubJr Mk2 is getting clocked off the clock output of the Seq1.

This whole mess is getting mixed in the lower right-hand corner in the Circuit Abbey Unify. The main outputs are running to a stereo pair in Live, and the headphone output is running to a prototype of ADM15 Spectre (our upcoming FFT freeze module.) This is in the lower left-hand corner. The left-hand Neuron (the kick) is the sidechain source for a Kompressor, which Spectre runs through, and thus to a Dimensions chorus, and to the Unify mixer that is in the lower right of the upper case.

That Sequencer 1's last CV output is running to its own CV1 input, with a random LFO triggering the repeats on the second pattern I run starting at 5:50.

Euro Synth: The synth lines coming from the Eurorack are driven by the top Sequencer 1. This Sequencer 1 is modulating itself in the same manner as above, and the CV and gate outputs are driving the WMD/SSF set in the second row, in a typical 2-osc / 2-env / 1 filter configuration. Nothing special about this at all. This is getting mixed with Spectre via the Unify in the second row, and then on to a second pair of inputs to Live.

The Live Thing: This is actually much later in an extended Live set (for another section that has more coming from Live, see previous video), and the slots that have stuff in them you can't see since the right side of the Push 2 unit is out of frame. But suffice to say there's stuff there and it's running. I am, in this instance, primarily using Live and the Push 2 as a mixer, though.

The first channel, EuroDrums, has as its source the stereo pair from the lower Unify (the percussion.) I have an Effect Rack on the channel, with a whole raft of shit in it. There are two instances of Eventide H3000 Factory, an instance of AD Replicant, and an instance of SonicCharge Permut8, as well as various compressors, EQs, delays, etc. Four of the knobs in the Effect Rack (and thus on the Push 2) drive various controls on the buffer effects, three of them control delay flavor, and the last one controls distortion/bitcrushing. In this manner, I can just whack the EuroDrums button on Live, and I have a lot of control over the drum buss, at least as far as glitching/buffer shit goes.

The second channel, EuroSynth, is much the same, with an Effects Rack with all the macro knobs mapped. However, instead of buffer effects, I have stuff appropriate to the sort of synth work I do. Five of the macro knobs are mapped to Mangleverb, and three of them are mapped to another Effects Rack that contains two Dubstations arranged in a ping-pong array.

There is an audio channel off to the right that you can't see that is playing a loop of a field recording of water running throughout the video, and there is also a channel that contains an instance of Silent Way Sync that is providing the master clock for the Eurorack. There are three effect return channels, and my sends are ValhallaVintageVerb, Eos, and DubJr (this is actually my template Live set, and I have those three in everything I do.) All channels have the NI SolidBus compressor on them, and various EQs appropriate to the task, as does the master channel.

monome: The monome 128 that you see in the bottom of the frame is controlling an instance of Flin as a M4L midi effect. This is in front of an instance of AD Phosphor. I kick this on for the second half of the first song.

So, as you can see, a lot going on, but once it's all set up, it's pretty fluid. Effects Rack macros to control the synth and drum buss effects, Euro for sound sources, and Live for stuff that can't be done with the Euro. All directly accessible and fairly easy to control. I'm greatly enjoying exploring this hybrid workflow, and am incredibly happy with the Push 2. I imagine this is how I'll be making music for some time now. The trick is to treat the monome / Push 2 / Eurorack as a holistic instrument, and learn it that way, rather than concentrating on any one thing at the expense of the others, I think.

Here is the audio. If you click through to the Octave page, you can download a high-quality MP3.

Listen to "glitch one / glitch two" by chris randall.

November 26, 2015

Octave Is...

by Chris Randall

Listen to the album "009909" by Chris Randall.

For those of you that don't follow me on Twitter, I let it drop the other day that me and the missus and our long-time web collaborator Mark Beeson made a thing.

From the embed above, it should be readily apparent what it does. And long-time readers will know exactly why we made it, so I don't need to go in to any lengthy explanation about that. Suffice it to say that we've been working on it for about a while now, and Octave is now open for business. We're addressing user wishes as they come in, so its purview is adjusting (and rather rapidly, it must be said) to the use cases that we, as professional musicians, need.

Happy to field any questions/comments here. One further thing: in conversation about the service with someone that didn't fully understand the point, I quipped the following: "Soundcloud is for musicians with fans; Octave is for musicians with clients."

Displaying 51 to 55 of 1964 available blog entries.

Page 11 of 393